Brushless DV 24V Dual Direction Swing Barrier Turnstile Gate with IC ID Card Reader for School

Product Details
Customization: Available
Sensing Method: Slot Reader
Application: Access Control System
Manufacturer/Factory
Gold Member Since 2020

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Registered Capital
50000000 RMB
Plant Area
101~500 square meters
  • Brushless DV 24V Dual Direction Swing Barrier Turnstile Gate with IC ID Card Reader for School
  • Brushless DV 24V Dual Direction Swing Barrier Turnstile Gate with IC ID Card Reader for School
  • Brushless DV 24V Dual Direction Swing Barrier Turnstile Gate with IC ID Card Reader for School
  • Brushless DV 24V Dual Direction Swing Barrier Turnstile Gate with IC ID Card Reader for School
  • Brushless DV 24V Dual Direction Swing Barrier Turnstile Gate with IC ID Card Reader for School
  • Brushless DV 24V Dual Direction Swing Barrier Turnstile Gate with IC ID Card Reader for School
Find Similar Products

Basic Info.

Model NO.
LD-B502
Type
Swing Gate
Control Mode
Automatic
Communication Interface
RS485, TCP/IP
Material
304 Stainless Steel
Thickness
1.5mm
Direction
Bi Direction
Drive Motor
Brushless DV 24V
Open Speed
0.2s
Passage Speed
40 Per/ Min
Channel Width
600-900mm
Working Temp
-20~70
Infrared Sensor
6 Pairs
Communictaion
RS232 RS485
Open Method
IC/ID Card, Face Recognition Device
Protection Level
IP45
Woring Environment
Indoor or Outdoor
Serving Life
> 6 Million Times
Warranty
18 Months
Transport Package
Carton
Specification
304 Stainless steel
Trademark
LIDE
Origin
China
HS Code
8608009000
Production Capacity
100 Set Per Month

Product Description

Swing turnstile gate: It is mainly used for the management of the entrance and exit of the passage. It has the characteristics of fast opening, safety and convenience, etc. It is the ideal management and guidance equipment for high-frequency entrance and exit of pedestrians. Widely used in airports, subway stations, stations, terminals, attractions, parks, shopping malls, office buildings, pedestrianwalkways and other places. 

Brushless DV 24V Dual Direction Swing Barrier Turnstile Gate with IC ID Card Reader for School
Brushless DV 24V Dual Direction Swing Barrier Turnstile Gate with IC ID Card Reader for School
Brushless DV 24V Dual Direction Swing Barrier Turnstile Gate with IC ID Card Reader for School
Brushless DV 24V Dual Direction Swing Barrier Turnstile Gate with IC ID Card Reader for School
Swing gate ( Acrylic arm)
1, fully transparent glass partition and acrylic swing arm, with LED lighting, make it high class and elegant in the appearance.
2, Cost effective and wide application. It can be used indoor or outdoor (with shed) , such as schools, factory, gym, stadium, commercial buildings.
3, Unified and standard external electrical interface, which can be connected with various reading and writing devices, which is convenient for system integration.



 
Standard parameters:
Moduel No. LD-B502
Size 1400*185*1020mm
Material 304 stainless steel, acrylic
Channel width standard 600mm (≤900 can be customized)
Thickness of the cabinet  1.5mm+1.2mm
Drive motor DC 24V brushless motor, low noise
Control panel  one for one
Traffic direction one-way traffic/two-way traffic; traffic speed: 35-40 people/minute
Passing speed 35~40 person/minute
Opening methods ID/IC card and other readers to verify opening, infrared induction automatic opening, button opening, etc.
Opening signal dry contact signal
Protection functions  encoder limit, electromechanical anti-collision, infrared anti-clamping, infrared alarm for illegal intrusion
Life  ≥9 million times
Infrared quantity  6 pairs
Power 30-60w
Applicable temperature : -20~75ºC

Function:
 
(1) Automatic homing function: After the passage process is completed, the pendulum automatically returns to the initial blocking position.
 
(2) Power-off and opening function: When the power is cut off, the system will automatically unlock the pendulum, and it can be manually pushed into the open state (there is no battery installed inside, so manual operation is required after power off), which is convenient for evacuation of the crowd and meets fire protection requirements.
 
(3) Anti-illegal break-in function: When the card is invalid, there is no card swiping or the traffic is forbidden, forcibly pushing the pendulum will be regarded as illegal break-in, and the system will automatically alarm and lock
the pendulum.
 
(4) Anti-reverse passage function: When the pendulum has been swinging at a certain angle during the passage, a strong reverse pulling of the pendulum will be considered as reverse traffic, and the system will automatically alarm, and at the same time, lock the pendulum and stop the action.

(5) Intelligent linkage alarm: including alarms such as illegal break-in, reverse traffic, etc., which can be linked with other alarm monitoring equipment, and can be in the form of sound and light. If a flash alarm is required, alight-emitting alarm needs to be added to the casing.

(6) Anti-pinching and anti-collision function:
Infrared anti-pinching: Install multiple pairs of photoelectric switches in the area near the pendulum movement (anti-pinching zone). Once a person or object is detected in the anti-pinching zone, the pendulum automatically stops moving; The pendulum continues to move.

(7) Anti-collision function: When the brake pendulum is locked, it can withstand the impact force in a safe range. When the brake pendulum is out of the safe range, it can be slowly pushed to protect the movement and pedestrians, and then reset automatically.

(8) Passing instruction function: Install an LED indicating board at a conspicuous place on the housing frame to remind pedestrians the passing state of the gate.
 
Customizable extended functions:
1.  Counting and alarm functions;
2.  The length of the chassis can be customized according to customers, the
     shortest is 1.2 meters, the material of the swing arm is: transparent acrylic, the
     colors are: the colors can be customized separately
3.  Case material is 304, other materials can also be customized
4.   Remote control switch
5.   Dynamic integrated face recognition
6.   Can add emergency escape function, in the case of special emergency, start by
       remote button
7 . Fingerprint recognition of time attendance
8.  QR code pass
Brushless DV 24V Dual Direction Swing Barrier Turnstile Gate with IC ID Card Reader for School

 
Brushless DV 24V Dual Direction Swing Barrier Turnstile Gate with IC ID Card Reader for School

FAQ: 
1. How about your company's actual strength?
We are the professional manufacturer in turnstiles barrier gate in China. We have more than 100 employees, a R&D group with 5 people, 1 HQ office and 3 branches. Factories and office buildings are 2000 square meters in total.

2. How about the quality of your products?
We are in the highest level of quality with the most competitive price in the pedestrain barrier gate industry . For example, we use international standard  China-Japan Baoxin stainless steel 304 stainless steel, Taiwan Minwei electric supplier, belt import from German, 3M clue import from America etc.

3. How about the lead time?
Normally we have stock for the hot sale models of standard products.
Generally standard products need 10 working days.
The customized products need 20 working days.

4. How long is your warranty period?
12 months. Life time spare parts.

5. How about your package?
Exported product: Wooden case package of Export exempted from inspection plus pearl wool and plastic wrap
Domestic: Bubble wrap plus carton or pearl wool plus wooden packaging.

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier