• Fast Passage RFID Reading Face Recognition Access Control Speed Turnstiles Gate for Offices and Hotels
  • Fast Passage RFID Reading Face Recognition Access Control Speed Turnstiles Gate for Offices and Hotels
  • Fast Passage RFID Reading Face Recognition Access Control Speed Turnstiles Gate for Offices and Hotels
  • Fast Passage RFID Reading Face Recognition Access Control Speed Turnstiles Gate for Offices and Hotels
  • Fast Passage RFID Reading Face Recognition Access Control Speed Turnstiles Gate for Offices and Hotels
  • Fast Passage RFID Reading Face Recognition Access Control Speed Turnstiles Gate for Offices and Hotels

Fast Passage RFID Reading Face Recognition Access Control Speed Turnstiles Gate for Offices and Hotels

Sensing Method: Slot Reader
Application: Access Control System
Movement: Single Movement
Type: Swing Gate
Control Mode: Automatic
Communication Interface: RS485, TCP/IP
Customization:
Gold Member Since 2020

Suppliers with verified business licenses

Manufacturer/Factory

Basic Info.

Model NO.
LD-S703
Direction
Dual Direction
Speed
40 Per/ Min
Transport Package
Carton
Specification
304 Stainless steel
Trademark
LIDE
Origin
China
HS Code
8608009000
Production Capacity
100 Set Per Month

Product Description

Fast Passage RFID Reading Face Recognition Access Control Speed Turnstiles Gate for Offices and Hotels


Speed gate: It is mainly used for the management of the entrance and exit of the
passage. It has the characteristics of fast opening, safety and convenience, etc. It
is the ideal management and guidance equipment for high-frequency entrance
and exit of pedestrians. Widely used in airports, subway stations, stations,
terminals, attractions, parks, shopping malls, office buildings, pedestrian
walkways and other places. 
 
I. Standard parameters:
1. Material: stainless steel 304 + tempered glass + acrylic
2. Accessories: LED light board + acrylic swing arm + anti-collision movement +
tempered glass partition + rolling bearing4. Channel width: 600-900mm (customizable) Standard channel 600mm
5. Material structure: 304 stainless steel, tempered glass, acrylic
6. Material 304 stainless steel, outer box 1.2mm -1.5mm
7.Passing speed 35-45 people / minute
8. Communication interface: RS232 RS485
9. Opening time: 0.2s
10. Working temperature: -25 ° C ~ 70 ° C
11. Gate opening method: IC card, ID card, barcode card, ID card,
12. Drive motor: DC brushless 24V
13. Traffic opening method:
14. Infrared anti-pinch, illegal intrusion infrared alarm (imported infrared)
15. Encoder limit, clutch anti-collision
16. Noise floor
17. Life: 18 million times
18. Power: 60 -90w
19. Protection level: IP45 or above
20.The edge of the box adopts the planing process to make the assembly gap
smaller.
21. Working environment: indoor and outdoor (outdoor canopy)
 
Open method  Infrared sensor, finger print, face recognition, Barcode, Qr code , RFID card 
Infrared sensor  6 pairs 
Function:
(1) Automatic homing function: After the passage process is completed, the
pendulum automatically returns to the initial blocking position.
(2) Power-off and opening function: When the power is cut off, the system will
automatically unlock the pendulum, and it can be manually pushed into the open
state (there is no battery installed inside, so manual operation is required after
power off), which is convenient for evacuation of the crowd and meets fire
protection requirements.
(3) Anti-illegal break-in function: When the card is invalid, there is no card
swiping or the traffic is forbidden, forcibly pushing the pendulum will be
regarded as illegal break-in, and the system will automatically alarm and lock
the pendulum.
(4) Anti-reverse passage function: When the pendulum has been swinging at a
certain angle during the passage, a strong reverse pulling of the pendulum will
be considered as reverse traffic, and the system will automatically alarm, and at
the same time, lock the pendulum and stop the action.
(5) Intelligent linkage alarm: including alarms such as illegal break-in, reverse
traffic, etc., which can be linked with other alarm monitoring equipment, and
can be in the form of sound and light. If a flash alarm is required, alight-emitting alarm needs to be added to the casing.
(6) Anti-pinching and anti-collision function:
Infrared anti-pinching: Install multiple pairs of photoelectric switches in the
area near the pendulum movement (anti-pinching zone). Once a person or object
is detected in the anti-pinching zone, the pendulum automatically stops moving;
The pendulum continues to move.
(7) Anti-collision function: When the brake pendulum is locked, it can withstand
the impact force in a safe range. When the brake pendulum is out of the safe
range, it can be slowly pushed to protect the movement and pedestrians, and
then reset automatically.
(8) Passing instruction function: Install an LED indicating board at a
conspicuous place on the housing frame to remind pedestrians the passing state
of the gate.
Third, customizable extended functions:
1.Counting and alarm functions;
2. The length of the chassis can be customized according to customers, the
shortest is 1.2 meters, the material of the swing arm is: transparent acrylic, the
colors are: the colors can be customized separately
3. Case material is 304, other materials can also be customized
4.Remote control switch
5. Dynamic integrated face recognition
6. Can add emergency escape function, in the case of special emergency, start by
remote button
10. Fingerprint recognition of time attendance
11. QR code pass

Fast Passage RFID Reading Face Recognition Access Control Speed Turnstiles Gate for Offices and Hotels

 


 

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now

You Might Also Like

Gold Member Since 2020

Suppliers with verified business licenses

Manufacturer/Factory
Registered Capital
50000000 RMB
Plant Area
101~500 square meters