| Customization: | Available |
|---|---|
| Sensing Method: | Slot Reader |
| Application: | Access Control System |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Speed gate: It is mainly used for the management of the entrance and exit of the passage. It has the characteristics of fast opening, safety and convenience, etc. It is the ideal management and guidance equipment for high-frequency entrance and exit of pedestrians. Widely used in airports, subway stations, stations, terminals, attractions, parks, shopping malls, office buildings, pedestrian walkways and other places.
| Moduel No. | LD-S703 |
| Size | 1400*150*980mm |
| Material | 304 stainless steel + artificial marble panel |
| Unlocking time | 0.2s |
| Traffic speed | 50~55 persons/minute |
| Channel width | 600mm |
| Input voltage | 100V~240V |
| Drive voltage | 24V |
| Ambient temperature | -25~+70ºC |
| Power | 55w |
| Automatic homing function |
After the passage process is completed, the pendulum automatically returns to the initial blocking position.
|
| Power-off and opening function |
When the power is cut off, the system will automatically unlock the pendulum, and it can be manually pushed into the open state (there is no battery installed inside, so manual operation is required after power off), which is convenient for evacuation of the crowd and meets fire protection requirements.
|
| Anti-illegal break-in function | When the card is invalid, there is no card swiping or the traffic is forbidden, forcibly pushing the pendulum will be regarded as illegal break-in, and the system will automatically alarm and lock the pendulum. |
| Anti-reverse passage function |
When the pendulum has been swinging at a certain angle during the passage, a strong reverse pulling of the pendulum will be considered as reverse traffic, and the system will automatically alarm, and at the same time, lock the pendulum and stop the action.
|
| Intelligent linkage alarm |
including alarms such as illegal break-in, reverse traffic, etc., which can be linked with other alarm monitoring equipment, and can be in the form of sound and light. If a flash alarm is required, alight-emitting alarm needs to be added to the casing.
|
| Anti-pinching and anti-collision function | Infrared anti-pinching: Install multiple pairs of photoelectric switches in the area near the pendulum movement (anti-pinching zone). Once a person or object is detected in the anti-pinching zone, the pendulum automatically stops moving; The pendulum continues to move. |
| Anti-collision function | When the brake pendulum is locked, it can withstand the impact force in a safe range. When the brake pendulum is out of the safe range, it can be slowly pushed to protect the movement and pedestrians, and then reset automatically. |
| Passing instruction function | Install an LED indicating board at a conspicuous place on the housing frame to remind pedestrians the passing state of the gate. |
){kind=link}