Full Automatic RFID Facial Recognition System Turnstile Barrier Swing Gate

Product Details
Customization: Available
Sensing Method: Slot Reader
Application: Access Control System
Manufacturer/Factory
Gold Member Since 2020

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Registered Capital
50000000 RMB
Plant Area
101~500 square meters
  • Full Automatic RFID Facial Recognition System Turnstile Barrier Swing Gate
  • Full Automatic RFID Facial Recognition System Turnstile Barrier Swing Gate
  • Full Automatic RFID Facial Recognition System Turnstile Barrier Swing Gate
  • Full Automatic RFID Facial Recognition System Turnstile Barrier Swing Gate
  • Full Automatic RFID Facial Recognition System Turnstile Barrier Swing Gate
  • Full Automatic RFID Facial Recognition System Turnstile Barrier Swing Gate
Find Similar Products

Basic Info.

Model NO.
LD-B504
Movement
Single Movement
Type
Swing Gate
Control Mode
Automatic
Communication Interface
RS485, TCP/IP
Material
304 Stainless Steel
Thickness
1.2-1.5mm
Direction
Dual Direction
Passage Width
600mm-1200mm
Passage Speed
30-45 Per/Min
Open Speed
0.3s
Open Method
Face Recognition Device , RFID Reader
Communication
Dry Contact
Warranty
18 Months
Transport Package
Carton
Specification
304 Stainless steel
Trademark
LIDE
Origin
China
HS Code
8608009000
Production Capacity
100 Set Per Month

Product Description

High-end swing gate: it is mainly used for the management of passageway entrance and exit. It has the characteristics of fast opening, safety and convenience, etc. It is the ideal management and dredge equipment for pedestrians' high-frequency access and exit. It is widely used in airports, subway stations, stations, wharves, scenic spots, parks, shopping malls, office buildings, pedestrian passages and other places.

 
Moduel No. LD-B504
Size 1540*185*1020mm
Material  304 stainless steel, tempered glass, acrylic
Channel width standard 1200mm (<1200mm can be customized)
Thickness of the outer box 1.2mm+1.0mm
Drive motor DC 24V brushless motor, low noise
Movement structure first-level reduction movement
Motherboard One for two mode
Traffic direction one-way traffic/two-way traffic;
Passing speed 35~40 person/minute
Opening methods ID/IC card and other readers verify opening, infrared induction automatic opening, button opening, etc.
Opening signal dry contact signal
Protection functions electromechanical anti-collision, infrared anti-clamping, infrared alarm for illegal intrusion
Life 5 million times;
Infrared quantity 4 pairs
Power  40-70w
Applicable temperature : -20~75ºC
 
Product  Features 
 
1. No noise.
2. Years of experience in drive research and development;
3. The frame basically adopts the anti-cutting handbag edge design;
4. Imported electronic components are selected for the infrared sensor;
5. The movement drive adopts high temperature quenching to treat the gear drive, with
high strength and not easy to wear;
6. Unique drawing pattern of the frame;
7. The middle acrylic partition can be customized with light effect pattern;

 
Functions:
 
(1) automatic homing function: after the passage process is completed, the brake pendulum will automatically return to the initial arresting position.
 
(2) power off opening function: when power off, the system will automatically unlock the
brake pendulum, which can be pushed and swung into an open state manually (there is
no battery installed internally, so manual operation is required after power off), which is
convenient for crowd evacuation and meets the fire protection requirements.
 
(3) anti-trespass function: when swiping card is invalid, card is not swiped or passage is
prohibited, forcibly pushing pendulum will be regarded as trespass, and the system will
automatically alarm and lock the brake pendulum.
 
(4) anti-reverse intrusion function: before the end of the passage in a certain direction,
pedestrians entering the passage from the opposite direction will be regarded as a
reverse intrusion, and the system will automatically alarm.
 
(5) anti-reverse passage function: in the course of passage, when the brake pendulum
has swung at a certain Angle, the strong reverse pull of the brake pendulum will be
regarded as reversing passage, and the system will automatically alarm, lock the brake
pendulum and stop the action. 
 
(6) anti-trailing pass function: photoelectric switch detects the traffic condition of
pedestrians. After detecting the phenomenon of trailing (the person behind sticks to the
person in front, intending to pass without swiping the card), the system will automatically
alarm, lock the brake and stop the action.
 
(7) intelligent linkage alarm: including illegal break-in and reverse passage alarm, which
can be linked with other alarm monitoring devices in the form of sound and light. If a flash alarm is needed, a light alarm should be added to the casing.

(8) anti-clip and anti-collision functions:
A. Infrared clamping: install multiple pairs of photoelectric switches in the area near the
swing of the brake (clamping area). Once someone or object is detected in the swing of
the brake, the swing will stop automatically. The pendulum does not continue to move until the person or object has left the clamping area.

(9) anti-collision function: when the brake is placed in the locked state, it can withstand the impact force within the safe range. When it exceeds the safe range, the brake pendulum can be pushed slowly to protect the movement and pedestrians, and then reset automatically.


Full Automatic RFID Facial Recognition System Turnstile Barrier Swing Gate


About LIDE:

Guangdong Lide Intelligence Technology Co., Ltd is a high-tech enterprise integrating R&D, production, sales, installation, training and after-sales, specializing in providing intelligent channel solutions.

The main products are high-quality turnstiles and smart parking management systems, including tripod turnstile, flap barrier gate, swing barrier gate, speed gate, full-height turnstile, facial recognition terminal, vehicle barrier and automatic bollard.


Lide is committed to providing domestic and foreign customers with professional, efficient, and convenient intelligent entry and exit solutions, simplifying the complexity, achieving scientific, intelligent, and data management of personnel and vehicles; improving channel management efficiency, reducing labor costs, and reducing potential safety hazard.

Full Automatic RFID Facial Recognition System Turnstile Barrier Swing Gate
Full Automatic RFID Facial Recognition System Turnstile Barrier Swing Gate


After-sales services:
  1. All the products sold enjoy 18-month warranty and more spare parts are provided.
  2. After-sales service staff are online for 18 hours/day and all emails are replied within 1 hour. We offer life-time technology support on line, by emails, videos, phone calls, etc. We have engineers speaking English, Spanish and Arabic, etc. They are convenient to communicate with buyers or users directly.
  3. Engineers' on-site services are provided. Engineers are dispatched to customers' countries to handle various thorny problems.
Full Automatic RFID Facial Recognition System Turnstile Barrier Swing Gate
Full Automatic RFID Facial Recognition System Turnstile Barrier Swing Gate
Full Automatic RFID Facial Recognition System Turnstile Barrier Swing Gate
Full Automatic RFID Facial Recognition System Turnstile Barrier Swing Gate
Full Automatic RFID Facial Recognition System Turnstile Barrier Swing Gate
Full Automatic RFID Facial Recognition System Turnstile Barrier Swing Gate

FAQ: 
1. How about your company's actual strength?
We are the professional manufacturer in turnstiles in China. We have more than 100 employees, a R&D group with 5 people, 1 HQ office and 3 branches. Factories and office buildings are 2000 square meters in total.

2. How about the quality of your products?
We are in the highest level of quality with the most competitive price. For example, we use international standard  China-Japan Baoxin stainless steel 304 stainless steel, Taiwan Minwei electric supplier, belt import from German, 3M clue import from America etc. 


3. How about the lead time?
Normally we have stock for the hot sale models of standard products. Generally standard products need 7-10 working days.The customized products need 15-20 working days.


 

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier