Flap barrier : It is mainly used for the entrance and exit management of the passage. It has the characteristics of fast opening, safety and convenience. It is an ideal management and guidance equipment for high-frequency entrance and exit passages for pedestrians. Widely used in airports, subway stations, stations, terminals, attractions, parks, shopping malls, office buildings, pedestrian walkways and other places.
I. Standard parameters:
Moduel No. |
LD-Y605 |
Size |
1200* 980*300mm |
Material |
stainless steel 304 + acrylic panel |
Channel width |
550 |
Thickness of the cabinet |
1.2-1.5mm |
Passing speed |
35-40 persons / minute |
Communication interface |
RS232 |
Opening time |
0.2s |
Working temperature |
-30 ° ° C ~ 70 ° ° C |
Drive motor |
Brushless DC 24V |
Infrared |
3 pairs |
Life |
9 million times |
Power |
30-40w |
Working voltage |
AC100-240V |
Working environment |
indoor and outdoor (outdoor canopy) |
Function:
(1) Automatic return function: After the passage process is completed, the brake wings automatically return to the initial blocking position.
(2) Power-off and opening function: When the power is off, the system will automatically open the brake wings to open, which is convenient for evacuation of the crowd and meets fire protection requirements.
(3) Anti-illegal intrusion function: When the card is invalid, there is no card swiping, or the passage is forbidden, the forcible entry into the channel will be regarded as illegal intrusion, and the system will automatically alarm and close the flap.
(4) Anti-reverse intrusion function: Before the end of the passage process in a certain direction, pedestrians entering the passage from the opposite direction will be regarded as reverse intrusion, the system will automatically alarm and close the wing.
(5) Anti-trailing function: The photoelectric switch detects the pedestrian traffic situation, and detects the following phenomenon (the people behind are close to the person in front, intending to pass without swiping the card), the system will automatically alarm and close the brake wings.
(6) Intelligent linkage alarm: including illegal intrusion, reverse traffic and other alarms, which can be linked with other alarm monitoring equipment and can be heard.
(7) Anti-pinching and anti-collision function:
A. Infrared anti-pinch: Install multiple pairs of photoelectric switches near the area where the wing is active (anti-pinch area). Once a person or object is detected in the anti-pinch area, the wing automatically stops; The flaps continued to move.
Product advantages
1. Cabinet part:
1.1. Frame material: 304 #, thickness 1.2- 1.5 mm;
1.2. Multi-layer drawing on the surface of the frame;
1.3. The frame is welded by fixtures;
2. Drive Movement part:
2.1. Low noise;
2.2. Movement frame material 6061 profile aluminum;
2.3. The inner guide pulley adopts metal bearings;
3. Electric control accessories:
3.1. Switching power supply adopts brand power supply to make its operating
voltage more stable;
3.2. The infrared sensor uses a domestic brand, and the internal parts are
imported parts;
Third, customized extended functions:
1.Counting and alarm functions;
2. The material of the flap (retractable arm) is acrylic or soft flap. The colors are red, black and blue. The amount can be customized separately
3. Case material is mainly 304 stainless steel, other materials can also be customized
4.Remote control switch
5. Dynamic face recognition
6. Can add emergency escape function, in the case of special emergency, start by remote button
7. The communication interface is mainly RS232 / RS485, other interfaces
8.Box thickness standard 1.5mm can be customized 2.0mm
9. Fingerprint recognition of time attendance
10.QR code pass