Product Description
SPEED GATE widely used in airports, subway stations, stations, terminals, attractions, parks, shopping malls, office buildings, pedestrianwalkways and other places.
HighLight :
- Brushless DC motor, fast opening, steady operation, no noise
- Unified and standard external electrical interface, which can be connected with various reading and writing devices, which is convenient for system integration
- Speed gate is ultra-narrow design, Suitable for entrances and exits with insufficient channel width
- fully transparent glass partition and acrylic swing arm, with LED lighting, make it high class and elegant in the appearance.
Product Parameters
Standard parameters:
Moduel No. |
LD-S701 |
Appearance size |
1500*120*1020mm |
Material |
stainles 304 stainless steel, acrylics steel 304 + tempered glass + acrylic |
Channel width |
standard 600mm (≤900 can be customized) |
Thickness of the cabinet |
1.5mm+1.2mm |
Drive motor |
DC 24V brushless planetary gear motor, low noise |
Control panel |
one for one |
Traffic direction |
one-way traffic/two-way traffic; |
Passing speed |
50~55 persons/minute |
Opening methods |
ID/IC card and other readers to verify opening, infrared induction automatic opening, button opening, etc. |
Opening signal |
dry contact signal |
Protection functions |
encoder limit, clutch anti-collision, infrared anti-clamping, infrared alarm for illegal intrusion |
Life |
≥10 million times |
Infrared quantity |
6 pairs |
Power |
60-90w |
Applicable temperature |
-20~75ºC" |
Customizable extended functions
1.Counting and alarm functions;
2. The length of the chassis can be customized according to customers, the shortest is 1.2 meters, the material of the swing arm is: transparent acrylic, the colors can be customized separately
3. Case material is 304, other materials can also be customized
4.Remote control switch
5. Dynamic integrated face recognition
6. Can add emergency escape function, in the case of special emergency, start by remote control
10. Fingerprint recognition of time attendance
11. QR code pass
Function:
(1) Automatic homing function: After the passage process is completed, the pendulum automatically returns to the initial blocking position.
(2) Power-off and opening function: When the power is cut off, the system will automatically unlock the pendulum, and it can be manually pushed into the open state (there is no battery installed inside, so manual operation is required after power off), which is convenient for evacuation of the crowd and meets fire protection requirements.
(3) Anti-illegal break-in function: When the card is invalid, there is no card swiping or the traffic is forbidden, forcibly pushing the pendulum will be regarded as illegal break-in, and the system will automatically alarm and lock
the pendulum.
(4) Anti-reverse passage function: When the pendulum has been swinging at a certain angle during the passage, a strong reverse pulling of the pendulum will be considered as reverse traffic, and the system will automatically alarm, and at the same time, lock the pendulum and stop the action.
(5) Intelligent linkage alarm: including alarms such as illegal break-in, reverse traffic, etc., which can be linked with other alarm monitoring equipment, and can be in the form of sound and light. If a flash alarm is required, alight-emitting alarm needs to be added to the casing.
(6) Anti-pinching and anti-collision function:
Infrared anti-pinching: Install multiple pairs of photoelectric switches in the area near the pendulum movement (anti-pinching zone). Once a person or object is detected in the anti-pinching zone, the pendulum automatically stops moving; The pendulum continues to move.
(7) Anti-collision function: When the brake pendulum is locked, it can withstand the impact force in a safe range. When the brake pendulum is out of the safe range, it can be slowly pushed to protect the movement and pedestrians, and then reset automatically.
(8) Passing instruction function: Install an LED indicating board at a conspicuous place on the housing frame to remind pedestrians the passing state of the gate.
FAQ:
1. How about your company's actual strength?
We are the professional manufacturer in turnstiles in China. We have more than 100 employees, a R&D group with 5 people, 1 HQ office and 3 branches. Factories and office buildings are 2000 square meters in total.
2. How about the quality of your products?
We are in the highest level of quality with the most competitive price. For example, we use international standard China-Japan Baoxin stainless steel 304 stainless steel, Taiwan Minwei electric supplier, belt import from German, 3M clue import from America etc.
3. How about the lead time?
Normally we have stock for the hot sale models of standard products.
Generally standard products need 10 working days.
The customized products need 20 working days.
4. How long is your warranty period?
18months. Life time spare parts.
5. How about your package?
Exported product: Wooden case package of Export exempted from inspection plus pearl wool and plastic wrap
Domestic: Bubble wrap plus carton or pearl wool plus wooden packaging.